14.41. SimplanStages

This tab is in the Plan Setup tab.

The Simplan Stages tab is used to define the number of sections at each Stage of a plan in a simple progression plan.

For more information on Simplans, see the Simplans section.

14.41.1. Query and Edit Tabs

  • The ID field is the unique ID for this Site. The default ID prefix is SS.

  • The Simplan field is the Simplan to which this record applies.

  • The Stage field is the Stage to which the section count applies.

  • The Sections field is the number of sections of the specified Stage to be created for this plan.

  • The Fill Order field tells the order in which the sections in this stage are filled for a draw or progression. The choices are list here, each with an example showing the section ordering for that Fill Order whem there are four sections. order of sections used w

    • SEQ = Sequential: fill up the section before moving on to the next one. 1,1,1,1,..., 2,2,2,2,..., 3,3,3,3,..., ...

    • SEQ_SEQ = Sequential/Sequential: same as SEQ, but fill the lanes within each section in sequential order as well (the lanes specified in the Lane Order are sorted).

    • RR = Round Robin: 1,2,3,4, 1,2,3,4, 1,2,3,4, ...

    • SNAKE = Snake (or serpentine; boustrophedonic) 1,2,3,4, 4,3,2,1, 1,2,3,4, 4,3,2,1, ...

    • ZZ = Zig-Zag (like Round Robin but offset by one on each pass): 1,2,3,4, 2,3,4,1, 3,4,1,2, 4,1,2,3, 1,2,3,4, ...

14.41.2. Table

idStringUnique ID [primary key]
systemStringName of the system for this plan
simplanIdString The Simplan of which this record is a part [ref Simplans(id)]
stageIdString The Stage for which the count is being defined [ref Stages(id)]
sectionCountint The number of sections to create for the specified Stage for this plan.
fillOrderString The order in which sections are filled for draws or progressions. One of the short upper-case strings defined above.