Visualization controls

2-dimensional selection

  q, [          Increment / decrement the dimension shown on the x-axis
  w, ]          Increment / decrement the dimension shown on the y-axis

  After each selection, the dimensions being displayed will be shown
  on the upper left hand corner of the screen (in the form x-dim y-dim).
  The simulation will continue to run in 2-D mode - the circles represent
  the consumers, and the colored rectangles represent the manufacturers.

  The screen border will be the color of the current market leader.

  v             Enters / exits 3-D visualization mode.
                NOTE:  The simulation will be frozen in 3-D mode.
  
  q, [          Increment / decrement the dimension shown on the x-axis
  w, ]          Increment / decrement the dimension shown on the y-axis
  e, \          Increment / decrement the dimension shown on the y-axis

  7   8   9     -phi   / 0 / +phi    rotation
  4   5   6     -theta / 0 / +theta  rotation
  1   2   3     -rho   / 0 / +rho    rotation
      0         stop all rotation

  a             Toggles the coordinate axes, colored by the dimension
                that each axis represents.
  
  s             Toggles the display of the manufacturers, who show up
                as colored rectangles.
  
  d             Toggles between high / low resolution graphics modes.
                The points are easier to see, but harder to distinguish,
                in low resolution.

  ESC           Exits the simulation.

Screen shots

Two-dimensional projection of feature space

There-dimensional stereo projection of feature space